Slow Wi-Fi interrupts your daily life, making your mind chaotic and your life pause. This is true for ongoing calls, meetings, work, research, classes, or anything you do online. So, are you too disturbed by the alarming Wi-Fi router speed? Do you want to get out of that frustrating obstacle?
It comes to a pause where you cannot find or do anything. This is a true disaster, isn’t it? Especially in today’s world, when everything is reliant on the internet and faster connections, it is an obstacle that must be tackled on time.
Can we improve the Wi-Fi router speed?
Automating Reboot Schedule
Most routers do not need to reboot regularly. However, rebooting the router will allow it to get back up and run better if one encounters a dead connection.
But if you reboot it regularly, Tomato and DD-WRT firmware options offer a timed reboot.
So, set the same for rebooting once in the day when you sleep, and you won’t even notice downtime when the router turns off and then starts back again.
Changing Channel Width
One of the best router configurations for local speed entails changing channel width. The wider it is, the higher the chance that the old devices that run on the older protocols will suffer because of the interface.
Optimizing Channel Settings of Router
Have you ever considered changing the router channel? Many free tools scan the local airwaves for a given channel and will continue with the least interference. They suggest which channel one must switch to.
The channel change will be done through the router settings. To find the steps to do it, it will be available with your device’s documentation.
Wi-fining the router off and on. Begin by powering up everything to see if the Wi-Fi speed has iwi-fied. Remember, the power cycle is simple, but turning the home networking equipment off/on it can receive a boost. So, reboot regularly.
Restarting Modem: Unplug the same or the wireless gateway. Wait for 30 seconds and plug the same back in.
It would allow the modem to clear up the glitches. Remember that the modem translates the internet signals between the provider and the home network.
So, if the internet acts up, the power cycle is the best place to begin troubleshooting. It will fix the connection issues.
Restarting Router—If you own a standalone wireless router, repeat the process above. The power cycle will help clear the router’s memory and give it a fresh start on the tasks that bog it down.
Then, turn off Wi-Fi on all two-fireless devices, wait a few seconds, toggle back Wi-Fi, and let the thwi-fiices reconnect. This simple and easy procedure will improve the device’s connection.
Move the Router to the Better Location
Wi-Fi signals can travel only a bit. They can be interrupted or blocked by walls, ceilings, appliances, floors, or any large physical object.
They can even get interrupted by radio waves through other devices, including microwaves, Bluetooth speakers, baby monitors, cordless phones, etc.
If you place the router on the home space edge, you will face issues with the Wi-Fi on the other friend. So, the best router would be in an elevated and central location near where you generally use the internet most often.
Switching Wi-Fi Frequency wi-fi modern wireless router works primarily on the 2 radio frequency bands—2.4 GHz (a commonly used connection) and 5 GHz (a shorter range but better speed).
So, the band would be used for connections that can affect wireless speed and signal strength at varied distances from the router.
Regardless of the Wi-Fi frequency, Wi-Fi might experience temporary interference. So, switch to another one. It would show up as a different network on the device. As usual, the network name label can identify the network as 2.4 GHz or 5 GHz.
Adjusting the Antenna of the Router
The various wireless routers and gateways have internal antennas. This means they remain mounted within the device, so one can’t adjust them.
In that case, skip the step. However, if the router has an adjustable antenna, try reconfiguring it. The router antennas are mostly omnidirectional.
This means they send a signal out in all directions that remain perpendicular to the antenna. The vertical antenna sends the Wi-Fi signals in Wi-Fi-frontal mode and vice versa.
Adjust the antenna if you require the Wi-Fi signals to wi-fi across multiple floors. Let it sit horizontally to allow it to spread the Wi-Fi signals wi-fi up.
Also, if you need to cover more area, try to position the same vertically.
Extension of Wi-Fi network
If the wi-fi router is within the best location, but you have connectivity or speed issues in some home areas.
You might need an extension of the network range. A few devices like Wi-Fi boosters, Wi-access points, powerline extenders, and mesh Wi-Fi systems help to firebase the network reach.
Remove the unwanted connections.
If the router runs on a lower bandwidth, disconnect all unused devices. The quick way to do so is to change the password and reboot the router.
Then, try logging back into the network using a new password on all the devices currently used. This method will purge unnecessary connections.
Upgrading to the Faster internet
The internet connection is sometimes slow, making it difficult to sustain internet usage. In that case, you will need a faster internet plan to get a better speed.
Final Words
Wi-Fi is great, and Wi-fired connections are highly reliable and much faster. This is especially true for high-priority devices like gaming consoles, smart TVs, and desktops.
It would be worth plugging them into the router using ethernet cables instead of relying on Wi-Fi. If not, wi-fi the above data maximizes your router’s speed and ensures the best configuration for the faster speed.
Some might seem complicated, but believe it or not, they are not. So, go ahead and try it. Let your Wi-Fi router speak the best that it can offer.
FAQs
Why is slow Wi-Fi such a significant issue?
Slow Wi-Fi can disrupt various activities like calls, meetings, work, research, and classes, causing frustration and hindering productivity in today’s internet-dependent world.
How can I improve my Wi-Fi router speed?
You can improve Wi-Fi router speed by automating reboot schedules, optimizing channel settings, restarting the modem and router, adjusting antenna positions, and considering network extensions or upgrades.
What are the common causes of Wi-Fi interference?
Wi-Fi interference can occur due to physical obstacles like walls or appliances and radio waves from devices such as microwaves, Bluetooth speakers, and cordless phones.
Is upgrading to faster internet the only solution for slow Wi-Fi?
While upgrading to a faster internet plan can improve speed, optimizing router settings, adjusting antenna positions, and reducing interference can also significantly enhance Wi-Fi performance without additional costs.
Are the recommended Wi-Fi optimization techniques complicated to implement?
While some optimization techniques may seem complex, they are generally straightforward to implement with the right guidance. Most adjustments involve simple steps that users can easily execute.
Conclusion
Slow Wi-Fi can be a frustrating obstacle in our daily lives, disrupting essential tasks and causing undue stress. However, users can significantly improve their Wi-Fi router speed and reliability by implementing various optimization techniques such as scheduling reboots, adjusting channel settings, and optimizing antenna positions. Additionally, considering network extensions or upgrades and reducing interference from other devices can enhance Wi-Fi performance. By optimizing their Wi-Fi networks, users can enjoy smoother online experiences and make the most out of their internet connections.
